Quality Assurance & Control
Quality is measured and controlled at all stages at MCMW. Raw materials including scrap, ferroalloys, refractories, and all incoming materials and checked and then only accepted and issued for production. Steel samples are checked at all stages of melting refining and casting.
State of the art facilities and latest available equipment’s have been selected and employed in the quality assurance lab and team of process control monitors the same round the clock.
ARL vacuum emission Spectrometer iSpark 8860 model : Can analyze 30 elements in 60 seconds and analytical results are transmitted on the screen in the shop floor and also on the SCADA/ shop floor PC in the control rooms. LECO CS 744 carbon- Sulphur analyzer : Ensures precise analysis of low carbon levels (less than 0.02% carbon) and high Sulphur (>0.20%5).
LECO ONH Mode : For Oxygen Nitrogen and Hydrogen Gas analysis: Analyses dissolved and total oxygen, Hydrogen and Nitrogen in the steel samples during refining so as to ensure good gas level control in the steel.
WD XRF model ARL PERFORMX : This facilitates to analyze raw materials like ferroalloys, refractories and alike used for steel making unit as well as slag samples drawn at various stages, like EAF, LRF, VD and AOD to have better control on quality of steel being produced as per SOPs
